These a-arms will make your ATV much more stable giving you a total width of 49 inches and will lengthen the wheelbase by one inch. The added inch of length gets more weight on the front wheels which helps with turning and also removes that hard load transfer to the rear when you hit the throttle. They can be used with stock shocks or with aftermarket shocks. The a-arm design is the same with after market or stock shocks so you can buy the a-arms and add aftermarket shocks later if needed. These a-arms are lighter and stronger then stock and with after market shocks you will gain two inches of wheel travel. The a-arm kit comes with extended axel bars to account for the wider track width. You can choose from many different shock manufacturers for after market shocks so give us a call and we will help you in any way we can. The price of the kit is $1649.00.
Aftermarket Shock information
Piggy back shock reserviors that hang out to the sides will not work. You must use external reservoir with at least 10" of hose or rotate your piggy back res toward the rear of the vehicle.
Shock eyelet to eyelet dimension is 19.68 inches shock compressed length 14.68 inches. Total of 5 inches of shock travel.
Upper shock eyelet width 1.175"
lower eyelet width 1.175
Motion ratio measured every two inches of wheel compression.
first two 2.7:1
second two 2.35:1
third two 2.15:1
fourth two 2:1
fifth two 2:1
Call To order or get more information or place a preorder 610-963-0899
 copyL.jpg)
 copyL.jpg)
 copyL.jpg)
